Play Structures

Technical data
Total height: 8,33 m
Space occupied by the equipment: 13,69 x 4,85 x 8,33 m
Minimum space: 17,00 x 7,93 x 8,33 m
Free height of fall: 2,50 m
Impact area: 76 m²
Platform heights: 1,40/1,60/2,00/2,40/2,80/3,20/3,60 m
Slide installation height: 3,60 m
Slide entrance height: 3,70 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 410 kg heaviest single component
2410 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– infill barriers from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with six cut-outs from highly weather-resistant coloured HPL, 20 mm thickness, framed by stainless steel tubes
– sloping tottery stairs 0,80 m x 2,40 m, suspended from tandem railings, rungs from Robinia logs Ø 10 cm, fine stainless steel chains
– cranked ladder rungs made from stainless steel tubes Ø 33,7 x 2 mm
– vertical climbing pole from stainless steel tube Ø 38 mm
– counter/awning from highly weather-resistant coloured HPL, 15 mm thickness
– seat made from highly weather-resistant coloured HPL, 20 mm thickness
– entrance guardrail with roll-off prevention, welded assembly from stainless steel tubes Ø 33,7 x 2 mm, consisting of a horizontal guardrail and vertically positioned bent retaining tubes
– tower-shaped roof, 72° inclination, from highly weather-resistant HPL, 13 mm thickness, round edges
– trapezoid pent roof from highly weather-resistant coloured HPL, 13 mm thickness, fastening to a frame from stainless steel tubes Ø 33,7 x 2 mm
– tunnel hill slide 36°, installation height 3,60 m, curved at 36° to the left, sliding sections from stainless steel, of low noise level thanks to tunnel shape, incl. stainless steel support post Ø 120 mm, with stainless steel fastening flange
– vertical climbing pole made from stainless steel tube, Ø 38 mm
– Samba ladder made from stainless steel tubes
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction. Barrier height approx. 0,75 m, stainless steel support posts Ø 20 mm

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw cap.

Foundations (on site)
9 pcs. 0,50 x 0,50 x 0,60 m
9 pcs. 0,40 x 0,40 x 0,60 m
2 pcs. 1,00 x 0,50 x 0,60 m
1 pc. 0,30 x 0,30 x 0,40 m
1 pc. 0,90 x 0,75 x 0,40 m
concrete amount: 3,12 m³

Approximate assembly values
3 mechanics 16 hours each
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity