Technical data
\nTotal height: 2.30 m
\nFloor area: 7.32 x 7.98 m
\nMinimum space: 10.28 x 11.48 m
\nPlatform height: 0.60\/0.80 m
\nWeight: 75 kg heaviest individual part
\n\t1316 kg in total<\/p>\n
Support post
\nPosts made of stainless steel tube \u00d8 120 mm, covered with non-detachable stainless steel post caps. Connection of the modular add-on parts to the uprights using solid and fully welded stainless steel weld-in sleeves without protruding connecting elements.
\nPosts that are flush with a platform are covered with welded-on discs made of stainless steel.<\/p>\n
Platform floor
\nPlatform floor made of 30 mm thick boards and 45 x 100 mm squared timber joists all round. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection. Pump platform also with profiled stainless steel sheet.<\/p>\n
Attachments
\n- Add-on staircase with steps made of robinia 170 x 45 mm, screwed onto stainless steel frame \u00d8 33.7 x 2 mm, step height 133 mm
\n- Staircase balustrade made of stainless steel tube, \u00d8 33.7 x 2 \/ 20 x 2 mm, one-piece welded construction
\n- Sand lift with rubber transport container and 4 mm stainless steel chain, designed as a circumferential element so that the transport container cannot be pulled into neighbouring play areas or open spaces
\n- Sand pouring pipe without closure on hemisphere with welded-on stainless steel ring
\n- Sand slide made of stainless steel tube with HPL laminate panel
\n- Railing bracket, anti-roll, made of stainless steel tube, \u00d8 33.7 x 2 mm
\n- Tandem railing made of stainless steel tube, \u00d8 33.7 x 2 mm
\n- Climbing rung made of stainless steel tube, \u00d8 38 x 2.5 mm, twist-proof
\n- Access railing, roll-preventing, made of stainless steel tube, \u00d8 33.7 x 2 mm, consisting of horizontal railing tube and balustrade tubes arranged vertically on both sides
\n- Lattice balustrade made of stainless steel tube, \u00d8 33.7 x 2 \/ 25 x 2 mm, one-piece welded construction
\n- Attachable trough slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with roll-off protection above the single-seat section<\/p>\n
Water pump with pump swivel
\nWater pump for direct connection to a water pipe, suction pipe connection 1 \u00bc inch (pipe diameter at least \u00be inch)
\nWelded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed during the frost period. Cover (\u201ewinterisation plate\u201c) for the remaining lower part of the pump is supplied.
\nSuitable for mounting on a solid surface such as a platform provided by the customer
\nPlease note:
\nWhen connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.
\nPlease also observe the framework data specified in the installation instructions (distances, cable diameters, etc.); these are available on request from K&K or directly as a PDF at www.kaiser-kuehne.com.
\nIf the water supply is intentionally interrupted temporarily (timer or similar), a vacuum will build up in the pipework system if the pump is operated again, which will cause the pump swivel to kick back. It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock part number 1040639).<\/p>\n
Water reservoir
\nBase area: \u00d8 0.86 m
\nWelded stainless steel construction with a water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm\/tube \u00d8 38 mm, for connection to posts<\/p>\n
Y-channel
\nY-shaped water channel with one inlet and two outlets, sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm including 2 storage flaps, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Whirling table
\nWelded stainless steel construction with five adjustable HPL prisms as flow obstacles. Sheet thickness: min. 2 mm, pipe \u00d8 33.7 \/ \u00d8 30 mm<\/p>\n
Water distributing table (0,75)
\nTotal height: 0.90 m
\nWelded stainless steel construction with two water drain pipes. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm. Anchored to the flange ring. Matching ring foundation and moulded stones for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) available at an extra charge.<\/p>\n
Patio tray with drain pipe
\nBase area: \u00d8 0.90 m
\nTotal height: 0.14 m
\nWelded stainless steel construction with water drainage opening. Sheet thickness: min. 2 mm \/ tube \u00d8 38 mm. Connection to posts.<\/p>\n
Water channel 0.80 m
\nWelded stainless steel construction. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet.
\nAdditional elevation(s) during installation enable the required gradient for the water inlet and outlet to be infinitely variable.<\/p>\n
Water channel 1.60 m
\nWelded stainless steel construction. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet.
\nAdditional elevation(s) during installation enable the required gradient for the water inlet and outlet to be infinitely variable.
\nIncluding storage flap, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Conveyor basin solitary
\nWelded stainless steel construction with mounting device for the base bearing of the water spiral. Sheet thickness: min. 2 mm \/ tube \u00d8 38 mm.
\nWater drainage opening closed by cheese head screw. Anchored to the flange ring. Matching ring foundation and moulded stones for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) available at an extra charge.<\/p>\n
Water spiral with handwheel and crank drive at the top
\nLength: 2.00 m
\nDiameter: 0.25 m
\nHandwheel diameter: 0.80 m
\nWelded stainless steel construction with roller bearings, screw-on foot bearing<\/p>\n
Modular catch basin
\nWelded stainless steel construction for water absorption with drain pipe. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, <\/p>\n
Water channel 1.60 m, post connection
\nWelded stainless steel construction 0.80 m x 1.60 m, sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet
\nIncluding storage flap, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Water wheel, post connection
\nWheel: \u00d8 0.60 m
\nWelded stainless steel construction with post connection, for water absorption from a water channel. 12 blades, folded flat at the front and enclosed by side walls. Plate thickness 2.5 mm. Wheel bearings with roller bearings.<\/p>\n
Metal components: Stainless steel. The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment also reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening.<\/p>\n
Foundations (client-provided)
\n29 units 0.40 x 0.40 x 0.40 m
\n 1 piece 0.75 x 0.40 x 0.40 m
\n 4 units 0.30 x 0.30 x 0.40 m
\nConcrete volume: 2.2 m\u00b3<\/p>\n
Free fall height
\n1,00 m<\/p>\n
Suitable for
\nChildren aged 3 and over,
\npublic playgrounds etc.,
\nManual activities<\/p>\n
Water pump with pump swivel
\nWater pump for direct connection to a water pipe, suction pipe connection 1 \u00bc inch (pipe diameter at least \u00be inch)
\nWelded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed during the frost period. Cover (\u201ewinterisation plate\u201c) for the remaining lower part of the pump is supplied.
\nSuitable for mounting on a solid surface such as a platform provided by the customer
\nPlease note:
\nWhen connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.
\nPlease also observe the framework data specified in the installation instructions (distances, cable diameters, etc.); these are available on request from K&K or directly as a PDF at www.kaiser-kuehne.com.
\nIf the water supply is intentionally interrupted temporarily (timer or similar), a vacuum will build up in the pipework system if the pump is operated again, which will cause the pump swivel to kick back. It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock part number 1040639).<\/p>\n
Water reservoir
\nBase area: \u00d8 0.86 m
\nWelded stainless steel construction with a water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm\/tube \u00d8 38 mm, for connection to posts<\/p>\n
Y-channel
\nY-shaped water channel with one inlet and two outlets, sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm including 2 storage flaps, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Whirling table
\nWelded stainless steel construction with five adjustable HPL prisms as flow obstacles. Sheet thickness: min. 2 mm, pipe \u00d8 33.7 \/ \u00d8 30 mm<\/p>\n
Water distributing table (0,75)
\nTotal height: 0.90 m
\nWelded stainless steel construction with two water drain pipes. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm. Anchored to the flange ring. Matching ring foundation and moulded stones for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) available at an extra charge.<\/p>\n
Patio tray with drain pipe
\nBase area: \u00d8 0.90 m
\nTotal height: 0.14 m
\nWelded stainless steel construction with water drainage opening. Sheet thickness: min. 2 mm \/ tube \u00d8 38 mm. Connection to posts.<\/p>\n
Water channel 0.80 m
\nWelded stainless steel construction. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet.
\nAdditional elevation(s) during installation enable the required gradient for the water inlet and outlet to be infinitely variable.<\/p>\n
Water channel 1.60 m
\nWelded stainless steel construction. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet.
\nAdditional elevation(s) during installation enable the required gradient for the water inlet and outlet to be infinitely variable.
\nIncluding storage flap, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Conveyor basin solitary
\nWelded stainless steel construction with mounting device for the base bearing of the water spiral. Sheet thickness: min. 2 mm \/ tube \u00d8 38 mm.
\nWater drainage opening closed by cheese head screw. Anchored to the flange ring. Matching ring foundation and moulded stones for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) available at an extra charge.<\/p>\n
Water spiral with handwheel and crank drive at the top
\nLength: 2.00 m
\nDiameter: 0.25 m
\nHandwheel diameter: 0.80 m
\nWelded stainless steel construction with roller bearings, screw-on foot bearing<\/p>\n
Modular catch basin
\nWelded stainless steel construction for water absorption with drain pipe. Sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, <\/p>\n
Water channel 1.60 m, post connection
\nWelded stainless steel construction 0.80 m x 1.60 m, sheet thickness: min. 2 mm \/ pipe \u00d8 38 mm, bevelled outlet
\nIncluding storage flap, freely positionable, stainless steel handle, rubber blade with fabric insert<\/p>\n
Water wheel, post connection
\nWheel: \u00d8 0.60 m
\nWelded stainless steel construction with post connection, for water absorption from a water channel. 12 blades, folded flat at the front and enclosed by side walls. Plate thickness 2.5 mm. Wheel bearings with roller bearings.<\/p>\n
Metal components: Stainless steel. The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment also reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening.<\/p>\n
Foundations (client-provided)
\n29 units 0.40 x 0.40 x 0.40 m
\n 1 piece 0.75 x 0.40 x 0.40 m
\n 4 units 0.30 x 0.30 x 0.40 m
\nConcrete volume: 2.2 m\u00b3<\/p>\n
Free fall height
\n1,00 m<\/p>\n
Suitable for
\nChildren aged 3 and over,
\npublic playgrounds etc.,
\nManual activities<\/p>\n
Item number: 034410500<\/p>","protected":false},"excerpt":{"rendered":"
Technische Daten Gesamth\u00f6he: 2,30 m Grundfl\u00e4che: 7,32 x 7,98 m Mindestraum: 10,28 x 11,48 m Podesth\u00f6he: 0,60\/0,80 m Gewicht: 75 kg schwerstes Einzelteil 1316 kg insgesamt Standpfosten Standpfosten aus Edelstahlrohr \u00d8 120 mm, mit nicht l\u00f6sbaren Pfostenkappen aus Edelstahl abgedeckt. Anschluss der modularen Anbauteile an die Standpfosten durch solide und voll verschwei\u00dfte Edelstahl-Einschwei\u00dfh\u00fclsen ohne hervorstehende […]<\/p>\n","protected":false},"featured_media":486245,"comment_status":"closed","ping_status":"open","template":"","meta":{"_acf_changed":false,"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[84],"product_tag":[125,133],"class_list":["post-103427","product","type-product","status-publish","has-post-thumbnail","product_cat-sand-wasser","product_tag-edelstahl","product_tag-sand-und-wasserspielkombinationen","pa_altersgruppe-81","pa_hebezeug-false","pa_inklusionsattribute-dramaspiel","pa_inklusionsattribute-einzelspiele","pa_inklusionsattribute-erforschendes-spiel","pa_inklusionsattribute-feinmotorik","pa_inklusionsattribute-fuehlen","pa_inklusionsattribute-funktionelles-spielen","pa_inklusionsattribute-geschwindigkeit","pa_inklusionsattribute-gruppenspiele","pa_inklusionsattribute-hoehenerfahrung","pa_inklusionsattribute-koordination","pa_inklusionsattribute-paralleles-spielen","pa_inklusionsattribute-selbstwahrnehmung","pa_inklusionsattribute-tasten","first","instock","purchasable","product-type-variable"],"acf":[],"yoast_head":"\n